Two Notes CABM+ Speaker Simulator Pedal

SKU: TNCABM+ Categories: ,

$399.99

Out of stock

Speaker Simulator And More!

Two Notes C.A.B. M+ speaker simulator pedal offers a studio grade, amp-free rig loaded with 32 premium DynIR Virtual Cabinets. Every cabinet includes a choice of 12 room emulations and 8 mics. Building on the success of the acclaimed Torpedo C.A.B. M, the C.A.B. M+ includes a stunning clean preamp, refined power amps, enhancer, tuner, expanded reverbs and noise gate. 

Amp DI

The preamp and power amp sections can be independently engaged. Therefore, you can place the C.A.B. M+ between your tube amp and a reactive load box to create a ‘silent stage’ or use the Torpedo C.A.B. M+ with your favourite preamp pedal. This flexibility coupled with DynIR technology and comprehensive I/O, makes Torpedo C.A.B. M+ speaker simulator pedal your secret weapon - no matter how your rig evolves at home, on stage or in the studio.

IR Loader

The Torpedo C.A.B. M+ not only supports DynIR virtual cabinets but also loads regular (static) IRs. Store hundreds of IRs on the included memory card and effortlessly mix two static IRs files using the C.A.B. M+ hardware or via Torpedo Remote (phone, tablet or computer). The powerful onboard DSP allows the processing to happen with the minimum of latency - even with the maximum IR length of 200ms, the sound will hit you without any audible delay.

Two Notes CABM+ Speaker Simulator Specifications

Input / Output

Amp/Inst/Line Input:  1/4″ Jack balanced (TRS)

In Level Switch*:
+12dB: Max level: 4 dBu, Impedance: 1 MOhms
0dB: Max level: 16 dBu, Impedance: 57 kOhms
-24dB: Max level: 40 dBu, Impedance: 47 kOhms
*Affects input sensitivity and impedance

Aux In:
1/8″ (3.5mm) TRS Jack
Downmixed to mono

Speaker output*: 1/4″ Jack balanced (TS)
*Unprocessed, unbuffered, directly connected to Amp In

DI output*:
XLR balanced
Max level: 10 dBu
Impedance: 300 Ohms
*Protected against +48V phantom power

Line output:
1/4″ Jack balanced (TRS)
Max level: 10 dBu
Impedance: 300 Ohms

Headphones output:
1/8″ Mini-Jack (TRS)

USB connector:
USB 2.0 Micro-B

Memory card:
256Mb Micro-SD included Up to 32Gb cards supported

Digital Audio

AD/DA Converters:
Studio-grade 24-bit / 96 kHz

Bandwidth (-1dB):
30 Hz – 19 kHz

Signal-to-noise ratio:
91 dB

Internal Processing:
32-bit floating-point

Latency:
2.2 ms (Line Input to Line Output)

Power

Power input connector:
DC connector, 2.1mm x 5.5mm, center negative

Supplied adapter:
100-240v AC to 12v DC 1A

Power consumption:
Approximately 2W

Current consumption:
200mA

Dimensions & Weight

Width x Depth x Height*:
12.1cm x 10cm x 6cm – 4.8″ x 4″ x 2.4″
*Including connectors and knobs

Weight: 450 g / 0.99 lbs